Sentry Water Cable Barrier Wall

Durable High Density Polyethylene, includes steel connection pin, plastic fill hole cap and plastic threaded release cap. 6'l x 43"h x 22"w, holds 220 gallons of water. Weight (empty) 60 lbs, Weight (filled w/water) 2,000 lbs, Material: Linear High Density Polyethylene. This barrier will replace any concrete barrier and stand up to similar qualifications.

Testing Qualifications:
• 4,409 lbs (2,000 kg) at 25º Impact Angle and 45 mph (70 kph)
• Deflections - TL-2 45 mph (70 km/h) - only 5.9 feet (1.80 m)
• Deflections - TL-3 62.5 mph (100 km/h) - only 9 feet (2.74 m)

Sentry Barrier Features:
• The Sentry Water Cable Barrier Wall has been tested and accepted for all TL-2 & TL-3 light weight 1,807 lbs (820 kg) and heavy car at 4,409 lbs (2,000 kg) vehicle impacts at 45 mph (70 kph) and 62.5 mph (100 kph) impacts.
• Four integrally molded corrosion resistant steel cables prevent the impacting vehicle from breaching the Sentry Water Cable Barrier.
• The integrally molded steel cable and bushings allow for creation of a free standing, continuous longitudinal water cable barrier.
• Stacking lugs on the top and bottom of the sentry make storage and transport a breeze.
• Forklift through holes and pallet jack slots make movement and placement quick and easy.
• Interlocking knuckle design allows for positive connection between Sentry barriers while still maintaining up to a 15 degree rotation between sections.
• 8 inch diameter fill hole allows for quick filling.
• Tamper resistant drain plug with course buttress thread screws in or out in only 1.5 turns.